Cashmere Connections

I stood outside Cashmere connections, pondering their sign. It promised to process cashmere, angora, alpaca and cashgora. What is cashgora?! Is that an animal I haven’t heard of yet?

I called Trisha to let her know I had arrived; she came out from the workshop to let me in. She’s friendly and casual, but is a wealth of information and a patient explainer! We walked to the storage area, so I could see where the process begins.

The business

A cashmere farmer, Trisha and her husband developed Cashmere connections as a way to add value to their fibre product. They buy fibre direct from farmers and have it scoured at Velieris. Then they card and comb the fibres for worsted, semi-worsted and woollen spinning.

Cashmere connections processes smaller quantities of quality product. They concentrate on local and international niche markets of doona makers and spinners. Their tailored service is key to their ability to process so many different fibres well.

Entering the combing machine

Fibre being drawn into the combing machine

The process

Each kind of fibre is different: suri is dense and slippery; needing carding in small quantities or the machinery jams. Wool and cashmere don’t have the dust issues that alpaca has. Goat and alpaca fibres intended for spinning need dehairing to remove coarse hairs. That cashgora I was wondering about? It’s a cross between cashmere and angora goats.

The machinery at Cashmere connections is deliberately old. New machinery assumes a standardised product and can break fine animal fibres. Older machinery can be adjusted for each fibre type. Trisha even adjusts machinery for each individual batch according to its characteristics.

Before carding, anti-static is added to the fibres. A fine mist of water fills the room that holds the carding machines. The water relaxes the fibres and reduces dust. Fibres come out of carding as a sliver. This is fed into gilling machines three times, or more if suri fibre is being processed. The slowest part of the process is combing, before one last run through the gilling machine.

Exiting the combing machine

Exiting the combing machine. So light and lofty!

The potential

Under a cover in a corner of the workshop, Trisha unveiled a different piece of equipment. It is a repco spinner from the 1960s. Trisha’s been experimenting with is, in the hope she can offer worsted spinning as a service. Its different to other spinners I’ve seen, spinning 2 plys at a time. Trish’s got some lovely sample cones and knitted swatches. The process isn’t to a commercial standard yet. Fingers crossed it will be soon!

Cashmere connections has a small shop on site, but you can also find their products online. They sell beautiful throws and exquisite single fibre and blended tops. You might manage to meet Trisha in person; on occasion she holds a stall at the natural fibres market.

Yarn samples

Yarn samples


Velieris

Tucked away in an industrial pocket of Braybrook, Velieris manufacture beautiful carpets and rugs. I visited because they offer scouring as a service to other textile businesses.

Fibre first

Rocco, the production manager showed me around on the day. We started in the scouring room, which was piled high with bales of fibre. Velieris buys wool and alpaca fibre from co-ops who gather local fibre in a central location. The fibre is sorted for quality, length and colour at the co-op, then delivered to Melbourne. Velieris also buys fibre from Peru and NZ to make up the quantities they need.

Scoured fibre

Scoured fibre

The company scours for doona and pillow manufacturers, local processers and UK spinning mills. Velieris accept orders between 1000-50kg, which makes their service accessible to smaller players.

Clean it up

Bubbles!

Bubbles!

Velieris use an eco soap in their scouring bowls. The first four bowls have soap; their water is steam heated. Effluent from scouring goes through their water treatment plant to remove the soap. Some chemicals are used at this stage. They also need to cool the water down before it is released. Their sludge, all the dirt removed in scouring, goes into landfill.

Water treatment

Water treatment

At this stage, if the fibre has been processed for an external company, Rocco bales the scoured fibres up and sends them off. All the carpet fibre moves to the next stage of mixing, carding and combing.

Mix it up

Velieris specialise in luxury naturally coloured products. They use a weighing machine to mix colour ‘recipes’. Eliminating the dying process reduces water usage and retains the softness of the wool and alpaca fibres Velieris use.

Weighing machine (green, on left) and carder (grey box on right)

Weighing machine (green, on left) and carder (grey box on right)

There’s no need for dehairing, because this fibre is destined for carpet. The fibres are sucked into a huge carding machine, then transfered to combers. Melbourne’s manufacturing history feels very close when you’re standing next to these old, but still powerful machines.

Combing machines

Combing machines

The combed fibres are gilled twice to even them out before spinning. I loved watching the fibre snake up into the gilling machine!

The resulting slivers are then spun and plyed into carpet yarn. The yarn is tufted before heading to the loom to be woven into carpet. Velieris do moth proof their carpets, but they are happy to skip this step at the customer’s request.

Weaving it together

Carpet maker

Carpet loom

The carpet loom is a thing of wonder. I couldn’t capture it all in a photo, so I’ll try to describe it. You have the loom up one end of the factory of course, but what you see is more like a yarn blood system. Leading into the loom are about 10 metal frames. Each frame holds about 10 cones of yarn. Each cone of yarn is strung through the frame, to the loom to make the warp. The whole system takes up about 15 square metres. It’s impressive.

Once woven, the carpet gets checked over by hand for any blemishes like loose threads. It’s trimmed to create a neat consistent top, then sent off for backing. Velieris makes the carpet entirely at their Braybrook workshop, except for the latex backing. This is done by an external specialist in Melbourne because it’s cheaper.

Checking for blemishes

Checking for blemishes

Side line

There was one row of spinning machines that weren’t running when I visited. These machines were bought in error – they are fine yarn spinners. Rocco’s been experimenting with them to get a good product to attract a buyer with. He can get a 270 tex yarn. He’s met a group interested in returning fine yarn spinning to Melbourne, but they don’t yet have the skills to use the machinery. Will we see fine yarns in this Fibreshed again one day?

Carpet and fine yarn samples from Velieris

Carpet and fine yarn samples from Velieris


Carding, Combing and Spinning

It’s been hard to twist my head around how scoured fibres are transformed into yarn (pun intended). I knew little at the start of this Fibreshed project. Everyone seemed to have slightly different definitions of the same terms, which confused me further. In retrospect, I think each person I met taught me different parts of the process. I couldn’t see the big picture. It’s not until I came to write this post that it started to come together. Please forgive me if I’m wrong on some points and point me in the right direction please!

What’s in a name?

It’s a bit backwards, but I found spinning easier to understand when I sorted out which yarn type was which:

Woollen – this isn’t just fibre from a sheep, but also a style of yarn spinning. Woollen yarns are warm, airy and soft. They often have a fuzzy appearance. While they’re not hard wearing, they’re perfect for scarves, hats, sweaters and felted knits. Their short fibres align in different directions, making air pockets that insulate.

Worsted – a smooth yarn that is hard wearing and drapes well. The tightly twisted fibres of worsted yarns often have a sheen. They’re used for suits, socks and sportswear. Their long fibres all face the same direction, making them very strong.

Wool skeins

Worsted wool skeins in the Tarndwarncoort wool shop

Simple, right? Until you realise that there’s a subset of yarns, known as semi-worsted. This is the yarn that slunk silently in my spinning conversations, waiting for me to discover its meaning! This is yarn that has been prepared with in a woollen style, but spun with a worsted method. It combines qualities of both yarn types. There’s also a semi-woollen which is worsted processed but woollen spun. This seems to be less common.

n.b. when getting this article proof read by actual spinners, I discovered that the definitions of semi-worsted and semi-woollen are different depending on which spinner you ask. I’ve gone with the definition used by a grower and processor in my local Fibreshed.

Alpaca yarn

Semi-worsted yarns from Wool 2 Yarn

Step by step

So now we’ve sorted out where we’re heading, let’s go back to the beginning. After scouring, fibre may be carded, combed and spun. Which of these steps are taken depends on whether you want to felt, knit or weave with the fibre.

Plant fibres like cotton and hemp have a similar but slightly different process to what I outline below. There is equipment to do this with the Melbourne Fibreshed, but I haven’t been able to see these in action yet. I’ll update this post when I know more.

flow diagram of the carding, combing and spinning process

The carding, combing and spinning process

Some processers add water and/or anti-static before starting. The water relaxes the fibre and reduces dust. The anti-static goes a step further to reduce the build up of static during the process, which can break the fibres.

Dehairing – Alpaca, goat mohair and cashmere all have long scratchy fibres mixed in with the softer fibres we prefer to use for clothing. They can be removed by hand, but most people use dehairing machines instead. Unfortunately this ends up as a waste product in the process, because the result is usually mixed with grass seeds. If you can think of a use for it, there’s a lot of fibre processors who’d like to hear your ideas.

The dehairing machine

A dehairing machine: the bin at the front holds the smooth fibre that comes out at the end of the process

Mixing – if the yarn is made from a blend of different fibres, it’s often mixed at this stage. Mills work to ‘recipes’ where fibres are measured by weight, then spread out on top of each other in layers. Chunks of this mix are separated out for processing, helping to keep the ratio mix consistent. With hand processing, staples of fibre are spread out in even layers on a hand or drum carder.

Carding – fibres are often a bit clumped after scouring, so this step opens the fibres up. Carding also removes a little bit of vegetable matter. This is where the process begins to split according to what you’re aiming for. There are woollen carders and worsted carders. The slivers that come off the woollen cards are ready for spinning. Worsted cards begin to align the fibres a little bit before moving on to gilling. 

Carding machines look super cool, with their rotating drums with wires at different lengths. This part of the process seems to be proprietary, so I can’t show you any photos of a carding machine in action. Luckily, hard carders are less shy of paparazzi.

Gilling – carding shakes things up a bit, so the fibre is usually gilled several times. Gilling machines ensure the worsted sliver is a uniform weight throughout. They also further align the fibres.

Gilling machines are the swans of the process – they take the slivers up gracefully. All the work happens where you can’t see it inside the machine, so it looks like magic.

Combing – this is the slowest part. Combing straightens out the fibres, and removes the shortest ones (the waste from this process is fed back into the woollen process, which uses short fibres). After combing, all the fibres are well aligned with each other, and more vegetable matter has been removed. It’s gilled one last time, then passed to felters or spinners as a finished top.

Exiting the combing machine

Fibres exiting the combing machine

Spinning – The woollen sliver or worsted top is condensed into thin roving. This is drawn out and twisted to create a single ply of yarn. To hand spin woollen yarn, the roving is rolled into rolags. It’s then drawn out and spun using a longdraw drafting technique. To hand spin worsted yarn, the roving is drawn out and spun using a short drafting movement. A man’s jumper requires about 1kg of roving. I’ve been told that this would take most hand spinners about 6 days to spin.

A single ply yarn can be used as is, but it is often plyed to increase its strength and stop it twisting in on itself. Spinning creates tension in the fibres, so the yarn is steamed or rested to release that energy.

The state of the industry

The majority of large mills in the Melbourne fibreshed don’t produce local yarn anymore. There are several mini mills that produce semi-worsted yarns for hand knitting and crochet.

Weaving requires a thinner yarn. Waverley Woollen Mills in Launceston produces woven products from carded fleece, spinning fine yarn in the process. The only processors spinning fine yarn in Australia that I know of are Paddock to Ply in Queensland and Certton in Sydney. 

Where does spinning happen in Melbourne?

Cashmere connections, Western district

Fibre Naturally, Dandenong ranges

Velieris, Melbourne

Wool 2 Yarn, Mornington Peninsula

Great Ocean Road Mill, Warnambool

 

Boston Fine Fibres, Queanbeyan

Echo Beach, Mount Barker

Bendigo Woollen Mills, Bendigo

Australian Country Spinners, Wangaratta

Creswick Woollen Mills

First Edition Fibre and Yarns, Euroa

Goldfeilds Mohair Farm, Bookham